Configuring Mld Snooping Policies; Configuring An Ipv6 Multicast Group Policy - HPE FlexNetwork 5510 HI Series Configuration Manual

Step
Setting the 802.1p priority for MLD messages in a VLAN
Step
Enter system view.
1.
Enter VLAN view.
2.
Set the 802.1p priority for
3.
MLD messages in the
VLAN.

Configuring MLD snooping policies

Before you configure MLD snooping policies, complete the following tasks:
• Enable MLD snooping for the VLAN.
• Determine the ACL used by the IPv6 multicast group policy.
• Determine the maximum number of IPv6 multicast groups that a port can join.

Configuring an IPv6 multicast group policy

This feature enables the device to filter MLD reports by using an ACL that specifies the IPv6
multicast groups and the optional sources. It is used to control the IPv6 multicast groups that receiver
hosts can join.
Configuration restrictions and guidelines
When you configure an IPv6 multicast group policy, follow these restrictions and guidelines:
• This configuration takes effect on the IPv6 multicast groups that ports join dynamically.
• You can configure an IPv6 multicast group policy globally for all ports in MLD-snooping view or
for a port in interface view. For a port, the port-specific configuration takes priority over the
global configuration.
Configuring an IPv6 multicast group policy globally
Step
Enter system view.
1.
Enter MLD-snooping view.
2.
Configure an IPv6 multicast
3.
group policy globally.
Configuring an IPv6 multicast group policy on a port
Step
Enter system view.
1.
Command
Command
system-view
vlan vlan-id
mld-snooping dot1p-priority
priority
Command
system-view
mld-snooping
group-policy ipv6-acl-number
[ vlan vlan-list ]
Command
system-view
206
Remarks
the device does not change the
802.1p priority.
Remarks
N/A
N/A
By default, the 802.1p priority for
MLD messages is not configured.
For MLD messages created by the
device, the 802.1p priority is 0. For
MLD messages to be forwarded,
the device does not change the
802.1p priority.
Remarks
N/A
N/A
By default, no IPv6 multicast
group policies exist. Hosts can
join any IPv6 multicast groups.
Remarks
N/A