Pim-Ssm Configuration Example - HPE FlexNetwork 5510 HI Series Configuration Manual

Flags: 0x0
Uptime: 00:08:32
RPF interface: Vlan-interface101
List of 1 DF interfaces:
# Display information about DFs for multicast forwarding on Switch B.
[SwitchB] display multicast forwarding df-info
Total 1 RP, 1 matched
00001. RP address: 1.1.1.1
Flags: 0x0
Uptime: 00:06:24
RPF interface: Vlan-interface102
List of 2 DF interfaces:
# Display information about DFs for multicast forwarding on Switch C.
[SwitchC] display multicast forwarding df-info
Total 1 RP, 1 matched
00001. RP address: 1.1.1.1
Flags: 0x0
Uptime: 00:07:21
RPF interface: LoopBack0
List of 2 DF interfaces:
# Display information about DFs for multicast forwarding on Switch D.
[SwitchD] display multicast forwarding df-info
Total 1 RP, 1 matched
00001. RP address: 1.1.1.1
Flags: 0x0
Uptime: 00:05:12
RPF interface: Vlan-interface103
List of 2 DF interfaces:

PIM-SSM configuration example

Network requirements
As shown in
• OSPF runs on the network.
• The receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist on each stub network.
• The entire PIM domain operates in the SSM mode.
1: Vlan-interface100
1: Vlan-interface101
2: Vlan-interface200
1: Vlan-interface102
2: Vlan-interface103
1: Vlan-interface300
2: Vlan-interface400
Figure 57:
153