HPE FlexNetwork 5510 HI Series Configuration Manual page 193

Ip multicast
Hide thumbs Also See for FlexNetwork 5510 HI Series:
Table of Contents

Advertisement

Peer address
State
2.2.2.2
Established 00:10:57
# Display brief information about MSDP peers on Switch D.
[SwitchD] display msdp brief
Configured
Established
1
1
Peer address
State
1.1.1.1
Established 00:10:57
# Send an IGMP report from Host A to join multicast group 225.1.1.1. (Details not shown.)
# Send multicast data from Source 1 to multicast group 225.1.1.1. (Details not shown.)
# Display the PIM routing table on Switch D.
[SwitchD] display pim routing-table
No information is output on Switch D.
# Display the PIM routing table on Switch B.
[SwitchB] display pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:15:04
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Protocol: igmp, UpTime: 00:15:04, Expires: -
(10.110.5.100, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: SPT 2MSDP ACT
UpTime: 00:46:28
Upstream interface: Vlan-interface103
Upstream neighbor: 10.110.2.2
RPF prime neighbor: 10.110.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Protocol: pim-sm, UpTime:
The output shows that Switch B now acts as the RP for Source 1 and Host A.
# Send an IGMP leave message from Host A to leave multicast group 225.1.1.1. (Details not
shown.),
# Send an IGMP report from Host B to join multicast group 225.1.1.1. (Details not shown.)
Up/Down time
AS
?
Listen
Connect
0
0
Up/Down time
AS
?
- , Expires:
183
SA count
Reset count
0
0
Shutdown
Disabled
0
0
SA count
Reset count
0
0
-

Advertisement

Table of Contents
loading

Table of Contents