Enabling Mld Snooping; Enabling Mld Snooping Globally; Enabling Mld Snooping For Multiple Vlans - HPE FlexNetwork 5510 HI Series Configuration Manual

Tasks at a glance
• (Optional.)
• (Optional.)
(Optional.)
Configuring parameters for MLD
• (Optional.)
• (Optional.)
Configuring MLD snooping
• (Optional.)
• (Optional.)
• (Optional.)
• (Optional.)
• (Optional.)
• (Optional.)
• (Optional.)

Enabling MLD snooping

When you enable MLD snooping, follow these restrictions and guidelines:
• You must enable the MLD snooping feature by using the mld-snooping command before you
enable MLD snooping globally or for a VLAN.
• MLD snooping configuration made in VLAN view takes effect only on the member ports in that
VLAN.
• For VLANs, you can enable MLD snooping for multiple VLANs in MLD-snooping view or for a
VLAN in VLAN view. The configuration in MLD-snooping view has the same priority as the
configuration in VLAN view.
To configure other MLD snooping features for VLANs, you must enable MLD snooping for the
•
VLANs even though MLD snooping is globally enabled. The MLD snooping configuration for
specific VLANs takes priority over the global MLD snooping configuration.

Enabling MLD snooping globally

Step
Enter system view.
1.
Enable the MLD snooping
2.
feature globally and enter
MLD-snooping view.
Enable MLD snooping
3.
globally.

Enabling MLD snooping for multiple VLANs

Step
Enter system view.
1.
Enable the MLD snooping
2.
feature and enter
Enabling the MLD snooping querier
Configuring parameters for MLD general queries and responses
Enabling MLD snooping proxying
messages:
Configuring source IPv6 addresses for MLD messages
Setting the 802.1p priority for MLD messages
policies:
Configuring an IPv6 multicast group policy
Enabling IPv6 multicast source port filtering
Enabling dropping unknown IPv6 multicast data
Enabling MLD report suppression
Setting the maximum number of IPv6 multicast groups on a port
Enabling IPv6 multicast group replacement
Enabling host tracking
Command
system-view
mld-snooping
global-enable
Command
system-view
mld-snooping
195
Remarks
N/A
By default, the MLD snooping
feature is disabled.
By default, MLD snooping is
disabled globally.
Remarks
N/A
By default, the MLD snooping
feature is disabled.