Setting The Maximum Number Of Ipv6 Multicast Vlan Forwarding Entries - HPE FlexNetwork 5510 HI Series Configuration Manual

Configuration restrictions and guidelines
When you perform this task, follow these restrictions and guidelines:
• The VLAN to be configured as an IPv6 multicast VLAN must exist.
• A port can belong to only one IPv6 multicast VLAN.
Configuration procedure
To assign user ports to an IPv6 multicast VLAN in IPv6 multicast VLAN view:
Step
Enter system view.
1.
Configure an IPv6 VLAN as
2.
an IPv6 multicast VLAN and
enter its view.
Assign ports to the IPv6
3.
multicast VLAN.
To assign a user port to an IPv6 multicast VLAN in interface view:
Step
Enter system view.
1.
Configure an IPv6 VLAN as
2.
an IPv6 multicast VLAN and
enter its view.
Return to system view.
3.
Enter interface view.
4.
Assign the current port to the
5.
IPv6 multicast VLAN.
Setting the maximum number of IPv6 multicast
VLAN forwarding entries
You can set the maximum number of IPv6 multicast VLAN forwarding entries on the device. When
the upper limit is reached, the device does not create IPv6 multicast VLAN forwarding entries until
some entries age out or are manually removed.
If the total number of entries exceeds the upper limit value that you are setting, the system does not
automatically remove existing entries or create new entries. In this case, remove excessive entries
manually.
To set the maximum number of IPv6 multicast VLAN forwarding entries:
Step
Enter system view.
1.
Set the maximum number of
2.
IPv6 multicast VLAN
forwarding entries.
Command
system-view
ipv6 multicast-vlan vlan-id
port interface-list
Command
system-view
ipv6 multicast-vlan vlan-id
quit
interface interface-type
interface-number
ipv6 port multicast-vlan
vlan-id
Command
system-view
ipv6 multicast-vlan entry-limit
limit
233
Remarks
N/A
By default, a VLAN is not an IPv6
multicast VLAN.
By default, an IPv6 multicast VLAN
does not have any user ports.
Remarks
N/A
By default, a VLAN is not an IPv6
multicast VLAN.
N/A
N/A
By default, a user port does not
belong to any IPv6 multicast VLAN.
Remarks
N/A
By default, the maximum number
of IPv6 multicast VLAN
forwarding entries is 2000.