Enabling Multicast Forwarding On A Non-Querier Interface; Configuring Multicast Load Splitting On An Igmp Proxy - HPE FlexNetwork 5510 HI Series Configuration Manual

ensure that the downstream receiver hosts on the router interface can receive multicast data,
you must enable multicast forwarding on the interface. For more information, see
multicast forwarding on a non-querier
To enable IGMP proxying:
Step
Enter system view.
1.
Enable IP multicast routing
2.
and enter MRIB view.
Return to system view.
3.
Enter interface view.
4.
Enable IGMP proxying.
5.

Enabling multicast forwarding on a non-querier interface

Typically, only IGMP queriers can forward multicast traffic and non-queriers cannot. This prevents
multicast data from being repeatedly forwarded. If a router interface on an IGMP proxy device failed
in the querier election, enable multicast forwarding on the interface to forward multicast data to
attached receiver hosts.
Configuration restrictions and guidelines
A shared-media network might have multiple MLD proxies, including one proxy acting as a querier.
To avoid duplicate multicast traffic, do not enable multicast forwarding on any of the non-querier MLD
proxies for the network.
Configuration procedure
To enable multicast forwarding on a non-querier interface:
Step
Enter system view.
1.
Enter interface view.
2.
Enable multicast forwarding on
3.
the interface.

Configuring multicast load splitting on an IGMP proxy

This feature enables all proxy interfaces on an IGMP proxy device to share multicast traffic on a
per-group basis.
To enable multicast load splitting on an IGMP proxy device:
Step
Enter system view.
1.
Enter IGMP view.
2.
interface."
Command
system-view
multicast routing [ vpn-instance
vpn-instance-name ]
quit
interface interface-type
interface-number
igmp proxying enable
Command
system-view
interface interface-type
interface-number
igmp proxy forwarding
Command
system-view
igmp [ vpn-instance
vpn-instance-name ]
91
"Enabling
Remarks
N/A
By default, IP multicast routing is
disabled.
N/A
N/A
By default, IGMP proxying is
disabled.
Remarks
N/A
N/A
By default, multicast forwarding
is disabled on a non-querier
interface.
Remarks
N/A
N/A