Pim-Sm Non-Scoped Zone Configuration Example - HPE FlexNetwork 5510 HI Series Configuration Manual

(*, 225.1.1.1)
Protocol: pim-dm, Flag: WC
UpTime: 00:04:25
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
(10.110.5.100, 225.1.1.1)
Protocol: pim-dm, Flag: ACT
UpTime: 00:06:14
Upstream interface: Vlan-interface103
Upstream neighbor: 192.168.1.2
RPF prime neighbor: 192.168.1.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
# Display PIM routing entries on Switch D.
[SwitchD] display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 225.1.1.1)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:03:27
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 2
1: Vlan-interface103
2: Vlan-interface102
The output shows the following information:
• Switches on the SPT path (Switch A and Switch D) have the correct (S, G) entries.
• Switch A has the correct (*, G) entry.

PIM-SM non-scoped zone configuration example

Network requirements
As shown in
• OSPF runs on the network.
Protocol: igmp, UpTime: 00:04:25, Expires: -
Protocol: pim-dm, UpTime: 00:04:25, Expires: -
Protocol: pim-dm, UpTime: 00:03:27, Expires: -
Protocol: pim-dm, UpTime: 00:03:27, Expires: -
Figure 54:
141