HPE FlexNetwork 5510 HI Series Configuration Manual page 150

[SwitchA-Vlan-interface100] igmp enable
[SwitchA-Vlan-interface100] quit
# Enable PIM-DM on VLAN-interface 103.
[SwitchA] interface vlan-interface 103
[SwitchA-Vlan-interface103] pim dm
[SwitchA-Vlan-interface103] quit
# Enable IP multicast routing, IGMP, and PIM-DM on Switch B and Switch C in the same way
Switch A is configured. (Details not shown.)
# On Switch D, enable IP multicast routing, and enable PIM-DM on each interface.
<SwitchD> system-view
[SwitchD] multicast routing
[SwitchD-mrib] quit
[SwitchD] interface vlan-interface 300
[SwitchD-Vlan-interface300] pim dm
[SwitchD-Vlan-interface300] quit
[SwitchD] interface vlan-interface 103
[SwitchD-Vlan-interface103] pim dm
[SwitchD-Vlan-interface103] quit
[SwitchD] interface vlan-interface 101
[SwitchD-Vlan-interface101] pim dm
[SwitchD-Vlan-interface101] quit
[SwitchD] interface vlan-interface 102
[SwitchD-Vlan-interface102] pim dm
[SwitchD-Vlan-interface102] quit
Verifying the configuration
# Display PIM information on Switch D.
[SwitchD] display pim interface
Interface
Vlan300
Vlan103
Vlan101
Vlan102
# Display PIM neighboring relationships on Switch D.
[SwitchD] display pim neighbor
Total Number of Neighbors = 3
Neighbor
192.168.1.1
192.168.2.1
192.168.3.1
# Send an IGMP report from Host A to join multicast group 225.1.1.1. (Details not shown.)
# Send multicast data from multicast source 10.110.5.100/24 to multicast group 225.1.1.1. (Details
not shown.)
# Display PIM routing entries on Switch A.
[SwitchA] display pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
NbrCnt HelloInt
0 30
1 30
1 30
1 30
Interface
Vlan103
Vlan101
Vlan102
DR-Pri DR-Address
1 10.110.5.1
1 192.168.1.2
1 192.168.2.2
1 192.168.3.2
Uptime Expires Dr-Priority Mode
00:02:22 00:01:27 1
00:00:22 00:01:29 3
00:00:23 00:01:31 5
140
(local)
(local)
(local)
(local)