Enabling Igmp Snooping; Enabling Igmp Snooping Globally; Enabling Igmp Snooping For Multiple Vlans - HPE FlexNetwork 5510 HI Series Configuration Manual

Ip multicast
Hide thumbs Also See for FlexNetwork 5510 HI Series:
Table of Contents

Advertisement

Tasks at a glance
(Optional.)
Configuring parameters for IGMP
(Optional.)
(Optional.)
Configuring IGMP snooping
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Enabling IGMP snooping

When you enable IGMP snooping, follow these restrictions and guidelines:
You must enable the IGMP snooping feature by using the igmp-snooping command before
you enable IGMP snooping globally or for VLANs.
IGMP snooping configuration made in VLAN view takes effect only on the member ports in that
VLAN.
For VLANs, you can enable IGMP snooping for multiple VLANs by using the enable vlan
command in IGMP-snooping view or for a VLAN by using the igmp-snooping enable
command in VLAN view. The configuration in VLAN view has the same priority as the
configuration in IGMP-snooping view.
To configure other IGMP snooping features for VLANs, you must enable IGMP snooping for the
specific VLANs even though IGMP snooping is globally enabled. The IGMP snooping
configuration for specific VLANs takes priority over the global IGMP snooping configuration.

Enabling IGMP snooping globally

Step
Enter system view.
1.
Enable the IGMP snooping
2.
feature and enter
IGMP-snooping view.
Enable IGMP snooping
3.
globally.

Enabling IGMP snooping for multiple VLANs

Step
Enter system view.
1.
Enable the IGMP snooping
2.
feature and enter
IGMP-snooping view.
Enabling IGMP snooping proxying
messages:
Configuring source IP addresses for IGMP messages
Setting the 802.1p priority for IGMP messages
policies:
Configuring a multicast group policy
Enabling multicast source port filtering
Enabling dropping unknown multicast data
Enabling IGMP report suppression
Setting the maximum number of multicast groups on a port
Enabling multicast group replacement
Enabling host tracking
Command
system-view
igmp-snooping
global-enable
Command
system-view
igmp-snooping
18
Remarks
N/A
By default, the IGMP snooping
feature is disabled.
By default, IGMP snooping is
disabled globally.
Remarks
N/A
By default, the IGMP snooping
feature is disabled.

Advertisement

Table of Contents
loading

Table of Contents