Enabling Ipv6 Multicast Forwarding On A Non-Querier Interface; Configuring Ipv6 Multicast Load Splitting On An Mld Proxy - HPE FlexNetwork 5510 HI Series Configuration Manual

Step
Return to system view.
3.
Enter interface view.
4.
Enable MLD proxying.
5.

Enabling IPv6 multicast forwarding on a non-querier interface

Typically, only MLD queriers can forward IPv6 multicast traffic and non-queriers cannot. This
prevents IPv6 multicast data from being repeatedly forwarded. If a router interface on the MLD proxy
failed the querier election, enable IPv6 multicast forwarding on the interface to forward IPv6 multicast
data to downstream receivers.
Configuration restrictions and guidelines
A shared-media network might have multiple MLD proxies, including one proxy acting as a querier.
To avoid duplicate IPv6 multicast traffic, do not enable IPv6 multicast forwarding on any of the
non-querier MLD proxies for the network.
Configuration procedure
To enable IPv6 multicast forwarding on a non-querier interface:
Step
Enter system view.
1.
Enter interface view.
2.
Enable multicast forwarding on
3.
the interface.

Configuring IPv6 multicast load splitting on an MLD proxy

This feature enables all proxy interfaces on an MLD proxy device to share IPv6 multicast traffic on a
per-group basis.
To enable IPv6 multicast load splitting on an MLD proxy:
Step
Enter system view.
1.
Enter MLD view.
2.
Enable IPv6 multicast load
3.
splitting on an MLD proxy.
Command
quit
interface interface-type
interface-number
mld proxy enable
Command
system-view
interface interface-type
interface-number
mld proxy forwarding
Command
system-view
mld [ vpn-instance
vpn-instance-name ]
proxy multipath
261
Remarks
N/A
N/A
By default, MLD proxying is
disabled.
Remarks
N/A
N/A
By default, IPv6 multicast
forwarding is disabled on a
non-querier interface.
Remarks
N/A
N/A
By default, IPv6 multicast load
splitting is disabled on an MLD
proxy, and only the proxy
interface with the highest IP
address forwards IPv6 multicast
data.