Menu Mode; Menu Mode Navigation; Smart Dc Controller: Menu Mode Navigation Buttons - HySecurity StrongArmPark DC Programming And Operations Manual

m m
enu ode
In Menu Mode, the motor disengages and operator commands are ignored. Data entry, menu navigation, and
menu selection can be accomplished using the buttons on the Smart DC Controller keypad.
NOTE: Menu Mode automatically returns to Run Mode if no activity (i.e. key presses) occurs for two minutes.
Two blinking characters
indicate that the display
will accept changes.
CT
NEXT or PREV
Navigational buttons.
Pressing Next or Previous
scrolls through the selections.
The 32-character LCD display limits what can be communicated with words. If you do not understand the
abbreviated word or acronym, please review the User Menu and Installer Menu sections.
m m
enu ode
Navigating within the program menus is easy once you learn how the keypad buttons function. Refer to the
following chart.
To change that data
appearing in the display
Press Select.
Two left characters blink.
20
MX3650-01 Rev. D
CT 0 (OFF)
CLOSE TIMER
CLOSE
OPEN
PREV NEXT
Pressing Select
causes the left most two characters to blink, (CT in
the example), which indicates the display is ready
to accept changes to a menu setting.
Use the navigational buttons to view selections.
Press Select a second time to accept what
appears on the display. Entry mode is exited, the two characters
stop blinking, and Next or Previous must be pressed to move onto a
different display. Pressing Program exits to Run mode.
n
avIgatIon

Smart DC Controller: Menu Mode Navigation Buttons

To navigate through the
Selections
Press Next or Previous.
Continue pressing Next to view
all selections.
StrongArmPark DC Programming & Operations
MENU
STOP RESET
SELECT
To choose what appears on
the display
Press Select.
Blinking characters
become static.
32-character display provides codes
which provide information about the
menu items.
The Reset button is disabled
while in Program Mode.
The Menu button accesses
program mode. When the
menu item is selected and
blinking, the Menu button
has no function. However,
pressing Menu when the
2 characters are static
(not blinking), returns the
operator to Run Mode.
To navigate between menu
items
Press Next or Previous.
Advance - press Next
Previous - press Previous
© 2017 www.hysecurity.com