AudioCodes Mediant 3000 User Manual page 588

routing rule is located, the device rejects the SIP request with a SIP 480 "Temporarily
Unavailable" response.
Note:
Classification process. If the call/request is rejected at this stage, no routing is
performed. The enforcement for the outgoing leg is performed within each alternative
route
classification/routing, and another during alternative routing process.
The following procedure describes how to configure CAC rules through the Web interface.
You can also configure it through ini file (SBCAdmissionControl).

To configure a CAC rule:
1. Open the Admission Control table (Configuration tab > VoIP menu > SBC >
Admission Control).
2. Click Add; the following dialog box appears:
Figure 31-1: Admission Control Table - Add Row Dialog Box
3. Configure an Admission Control rule according to the parameters described in the
table below.
4. Click Add.
Table 31-1: Admission Control Table Parameter Description
Parameter
Index
[SBCAdmissionControl_I
ndex]
Name
User's Manual
The device applies the CAC rule for the incoming leg immediately after the
iteration. This is accessed
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters. By default, no value is
from two places:
Description
588
Mediant 3000
one during initial
Document #: LTRT-89730