Configuring Time Bands For Cost Groups - AudioCodes Mediant 3000 User Manual

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

To configure a Cost Group:
1.
Open the Cost Group table (Configuration tab > VoIP menu > Services > Least
Cost Routing > Cost Group Table).
2.
Click Add; the following dialog box appears:
3.
Configure a Cost Group according to the parameters described in the table below.
4.
Click Add, and then save ("burn") your settings to flash memory.
Table 16-11: Cost Group Table Parameter Descriptions
Parameter
Index
[CostGroupTable_Index]
Name
[CostGroupTable_CostG
roupName]
Default Connection Cost
[CostGroupTable_Defaul
tConnectionCost]
Default Minute Cost
[CostGroupTable_Defaul
tMinuteCost]

16.4.2.2 Configuring Time Bands for Cost Groups

The Time Band table lets you configure Time Bands per Cost Group. A Time Band defines
a day and time range (e.g., from Saturday 05:00 to Sunday 24:00), as well as the fixed call
connection charge and call rate per minute for this interval. You can configure up to 70
Time Bands, where up to 21 Time Bands can be assigned to each Cost Group.
Note:
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters.
Note: Each Cost Group must have a unique name.
Defines the call connection cost (added as a fixed charge to the call) for a
call outside the time bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the current time of the call is
not within a time band configured for the Cost Group, then this default
connection cost is used.
Defines the call charge per minute for a call outside the time bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the current time of the call is
not within a time band configured for the Cost Group, then this default
charge per minute is used.
You cannot configure overlapping Time Bands.
Description
276
Mediant 3000
Document #: LTRT-89730

Advertisement

Table of Contents
loading

Table of Contents