Configuring A Gateway Routing Policy Rule - AudioCodes Mediant 3000 User Manual

25.4

Configuring a Gateway Routing Policy Rule

The Gateway Routing Policy table lets you edit the default Gateway Routing Policy rule.
The Routing Policy is used for Gateway call routing and defines the following:

LDAP server (LDAP Server Group) for LDAP-based call routing (LDAP and/or Call
Setup Rules queries). LDAP-based routing is applicable to Tel-to-IP routing
(''Configuring Tel-to-IP Routing Rules'' on page 496) and IP-to-Tel routing
(''Configuring IP-to-<trunkgroupM3K> Routing Rules'' on page 505).

Enables Least Cost Routing (LCR), and defines default call cost (highest or lowest)
and average call duration for Tel-to-IP routing rules that are not assigned LCR Cost
Groups. The default call cost determines whether matched routing rules that are not
assigned a Cost Group are considered as a higher or lower cost route compared to
other matching routing rules that are assigned Cost Groups. If you disable LCR, the
device ignores the Cost Groups assigned to Tel-to-IP routing rules in the Tel-to-IP
Routing table. LCR is applicable only to Tel-to-IP routing.
The following procedure describes how to configure Gateway Routing Policy rules through
the Web interface. You can also configure it through ini file (GwRoutingPolicy).

To edit the Gateway Routing Policy rule:
1. Open the Gateway Routing Policy table (Configuration tab > VoIP menu > Gateway
> Routing > Gateway Routing Policy).
2. Click Add; the following dialog box appears:
Figure 25-5: Gateway Routing Policy Table - Edit Row Dialog Box
3. Configure the Gateway Routing Policy rule according to the parameters described in
the table below.
4. Click Add.
Table 25-5: Gateway Routing Policy Table Parameter Descriptions
Parameter
Index
[GwRoutingPolicy_Index]
Name
[GWRoutingPolicy_Name
]
LDAP Servers Group
User's Manual
(Read-only) Displays the index number of the table row.
Defines an arbitrary name to easily identify the row.
The default value is "GwRoutingPolicy".
Assigns an LDAP Server Group to the Routing Policy. IP-to-Tel and Tel-
510
Description
Document #: LTRT-89730
Mediant 3000