AudioCodes Mediant 3000 User Manual page 392

3. Configure an IP Profile according to the parameters described in the table below.
4. Click Add.
Table 20-5: IP Profile Settings Table Parameter Descriptions
Parameter
Common
Index
[IpProfile_Index]
Name
[IpProfile_ProfileName]
Dynamic Jitter Buffer Minimum
Delay
[IpProfile_JitterBufMinDelay]
Dynamic Jitter Buffer
Optimization Factor
[IpProfile_JitterBufOptFactor]
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters.
Defines the minimum delay (in msec) of the device's dynamic Jitter
Buffer.
The valid range is 0 to 150. The default delay is 10.
For more information on Jitter Buffer, see Dynamic Jitter Buffer
Operation on page 211.
Note: The corresponding global parameter is DJBufMinDelay.
Defines the Dynamic Jitter Buffer frame error/delay optimization
factor.
The valid range is 0 to 12. The default factor is 10.
For more information on Jitter Buffer, see Dynamic Jitter Buffer
Operation on page 211.
Notes:

For data (fax and modem) calls, set the parameter to 12.

The corresponding global parameter is DJBufOptFactor.
392
Description
Document #: LTRT-89730
Mediant 3000