Heartbeat Packet Parameters; Resource Allocation Indication Parameters - AudioCodes Mediant 3000 User Manual

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

Parameter
SBC CDR Format Table
SBC CDR Format Table
configure voip >
services cdr > cdr-
format sbc-cdr-format
[SBCCDRFormat]

58.3.4 Heartbeat Packet Parameters

The Heartbeat packet parameters are described in the table below. The device sends a
heartbeat packet to ensure that the far-end is passing traffic.
Parameter
[HeartBeatDestIP]
[HeartBeatDestPort]
[HeartBeatIntervalmsec]

58.3.5 Resource Allocation Indication Parameters

The Resource Allocation Indication (RAI) parameters are described in the table below.
Parameter
[EnableRAI]
User's Manual
Gateway Calls on page 772.
The table defines CDR customization rules for SBC calls.
The format of the ini file table parameter is:
[ SBCCDRFormat ]
FORMAT SBCCDRFormat_Index = SBCCDRFormat_CDRType,
SBCCDRFormat_ColumnType, SBCCDRFormat_Title,
SBCCDRFormat_RadiusType, SBCCDRFormat_RadiusID;
[ \SBCCDRFormat ]
For a detailed description of the table, see Customizing CDRs for
SBC Calls on page 775.
Table 58-21: Heartbeat Packet Parameters
Defines the destination IP address (in dotted format notation) to which
the device sends proprietary UDP 'ping' packets.
The default IP address is 0.0.0.0.
Note: For the parameter to take effect, a device reset is required.
Defines the destination UDP port to which the heartbeat packets are
sent.
The range is 0 to 64000. The default is 0.
Note: For the parameter to take effect, a device reset is required.
Defines the delay (in msec) between consecutive heartbeat packets.
[10] = 100000
[-1] = (Default) disabled
Note: For the parameter to take effect, a device reset is required.
Table 58-22: RAI Parameters
Enables Resource Available Indication (RAI) alarm generation if the
device's busy endpoints exceed a user-defined threshold, configured by
the RAIHighThreshold parameter. When enabled and the threshold is
crossed, the device sends the SNMP trap, acBoardCallResourcesAlarm.
[0] = (Default) Disable
[1] = Enable
864
Description
Description
Description
Document #: LTRT-89730
Mediant 3000

Advertisement

Table of Contents
loading

Table of Contents