AudioCodes Mediant 3000 User Manual page 609

User's Manual
Parameter
[IP2IPRouting_SrcIPGrou
pName]
Request Type
[IP2IPRouting_RequestTy
pe]
Source Username Prefix
[IP2IPRouting_SrcUserna
mePrefix]
Source Host
[IP2IPRouting_SrcHost]
Source Tags
src-tags
[IP2IPRouting_SrcTags]
Destination Username
Prefix
[IP2IPRouting_DestUsern
amePrefix]
Version 7.0
the Classification table (see ''Configuring Classification Rules'' on page
595).
The default is Any (i.e., any IP Group).
Note: The selectable IP Group for the parameter depends on the
assigned SBC Routing Policy (in the 'Routing Policy' parameter in this
table). For more information, see ''Configuring SBC Routing Policy
Rules'' on page 616.
Defines the SIP dialog request type (SIP Method) of the incoming SIP
dialog.

[0] All (default)

[1] INVITE

[2] REGISTER

[3] SUBSCRIBE

[4] INVITE and REGISTER

[5] INVITE and SUBSCRIBE

[6] OPTIONS
Defines the prefix of the user part of the incoming SIP dialog's source
URI (usually the From URI). You can use special notations for denoting
the prefix. To denote calls without a user part in the URI, use the $ sign.
For available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 827.
The default is the asterisk (*) symbol (i.e., any prefix). If this rule is not
required, leave this field empty.
Note: If you need to route calls of many different source URI user names
to the same destination, you can use tags (see 'Source Tags' parameter
below) instead of this parameter.
Defines the host part of the incoming SIP dialog's source URI (usually
the From URI).
The default is the asterisk (*) symbol (i.e., any host name). If this rule is
not required, leave this field empty.
Assigns a tag to denote source URI user names corresponding to the tag
configured in the associated Dial Plan.
The valid value is a string of up to 20 characters. The tag is case
insensitive.
To configure tags, see Configuring Dial Plans on page 638.
Note:

Make sure that you assign the Dial Plan in which you have configured
the tag, to the related IP Group or SRD.

Instead of using tags and configuring the parameter, you can use the
'Source Username Prefix' parameter to specify a specific URI source
user or all source users.
Defines the prefix of the incoming SIP dialog's destination URI (usually
the Request URI) user part. You can use special notations for denoting
the prefix. To denote calls without a user part in the URI, use the $ sign.
For available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 827.
The default is the asterisk (*) symbol (i.e., any prefix). If this rule is not
required, leave this field empty.
609
Description
33. Routing SBC
Mediant 3000