AudioCodes Mediant 3000 User Manual page 271

User's Manual
Table 16-8: AD-Based Tel-to-IP Routing Rule Configuration Examples
Index
1 PRIVATE:
2 PBX:
3 OCS:
4 MOBILE:
5 LDAP_ERR
6 *
7 *
The table below shows an example for configuring AD-based SBC routing rules in the IP-
to-IP Routing Table:
Table 16-9: AD-Based SBC IP-to-IP Routing Rule Configuration Examples
Destination Username
Index
1 PRIVATE:
2 PBX:
3 OCS:
4 MOBILE:
5 LDAP_ERR
6 *
7 *
The configured routing rule example is explained below:

Rule 1: Sends call to private telephone line (at 10.33.45.60) upon successful AD
query result for the private attribute.

Rule 2: Sends call to IP PBX (at 10.33.45.65) upon successful AD query result for the
PBX attribute.

Rule 3: Sends call to Lync client (i.e., Mediation Server at 10.33.45.68) upon
successful AD query result for the Lync attribute.

Rule 4: Sends call to user's mobile phone number (to PSTN through the device's IP
address at 10.33.45.100) upon successful AD query result for the Mobile attribute.

Rule 5: Sends call to IP address of device (10.33.45.80) if AD query failure (e.g., no
response from LDAP server or attribute not found).

Rule 6: Sends query for original destination number of received call to the LDAP
server.

Rule 7: Alternative routing rule that sends the call of original dialed number to IP
destination 10.33.45.72. This rule is applied in any of the following cases
•
LDAP functionality is disabled.
Version 7.0
Destination Phone Prefix
Prefix
Destination IP Address
Destination Type
Dest Address
Dest Address
Dest Address
Dest Address
Dest Address
LDAP
Dest Address
271
16. Services
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.100
10.33.45.80
LDAP
10.33.45.72
Destination
Address
10.33.45.60
10.33.45.65
10.33.45.68
10.33.45.10
0
10.33.45.80
10.33.45.72
Mediant 3000