AudioCodes Mediant 3000 User Manual page 823

User's Manual

Registration Test Call Scenario: This example describes the configuration for testing
the registration and authentication (i.e., username and pas,sword) process of a
simulated test endpoint on the device with an external proxy/registrar server. This is
useful, for example, for verifying that endpoints located in the LAN can register with an
external proxy and subsequently, communicate with one another.
This example assumes that you have configured your device for communication
between LAN phone users such as IP Groups to represent the device (10.13.4.12)
and the proxy server, and IP-to-IP routing rules to route calls between these IP
Groups.
•
Test Call table configuration:
♦
♦
♦
♦
♦
♦
♦
♦
♦
Version 7.0
Figure 56-10: Test Call Registration Example
Endpoint URI: "101"
Called URI: "itsp"
Route By: Dest Address
Destination Address: "10.13.4.12" (this is the IP address of the device itself)
SIP Interface: SIPInterface_0
Auto Register: Enable
User Name: "testuser"
Password: "12345"
Call Party: Caller
823
56. Testing SIP Signaling Calls
Mediant 3000