Ldap Parameters - AudioCodes Mediant 3000 User Manual
Media gateway & enterprise session border
controller (e-sbc)
Hide thumbs
Also See for Mediant 3000:
- User manual (984 pages) ,
- Installation manual (90 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Parameter
e]
58.14.2.3
LDAP Parameters
The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below.
Parameter
LDAP Service
[LDAPServiceEnable]
LDAP Authentication Filter
[LDAPAuthFilter]
Use LDAP for Web/Telnet
Login
[MgmtLDAPLogin]
[LDAPDebugMode]
LDAP Numeric Attribute
configure voip > sip-
definition advanced-
settings > ldap-
numeric-attr
[LDAPNumericAttributes]
MS LDAP OCS Number
attribute name
[MSLDAPOCSNumAttribute
Name]
MS LDAP PBX Number
attribute name
[MSLDAPPBXNumAttributeN
ame]
MS LDAP MOBILE Number
attribute name
User's Manual
Table 58-76: LDAP Parameters
Enables the LDAP feature.
[0] Disable (default)
[1] Enable
Note: For the parameter to take effect, a device reset is required.
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
authentication and authorization.
You can use the dollar ($) sign to represent the username. For
example, if the parameter is set to "(sAMAccountName=$)" and the
user logs in with the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
Enables LDAP-based management-user login authentication and
authorization.
[0] Disable (default)
[1] Enable
Note: For the parameter to take effect, a device reset is required.
Determines whether to enable the LDAP task debug messages. This
is used for providing debug information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Defines up to five LDAP Attributes (separated by commas) for which
the device employs LDAP query searches in the AD for numbers that
may have characters between the digits.
For more information, see Enabling LDAP Searches for Numbers with
Characters on page 265.
Defines the name of the attribute that represents the user's Lync
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"msRTCSIP-PrimaryUserAddress".
Defines the name of the attribute that represents the user PBX
number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default is
"telephoneNumber".
Defines the name of the attribute that represents the user Mobile
number in the Microsoft AD database.
1056
Description
Description
Document #: LTRT-89730
Mediant 3000
Advertisement
Table of Contents
