AudioCodes Mediant 3000 User Manual page 891

User's Manual
Parameter
[TCPKeepAliveTime]
[TCPKeepAliveInterval]
[TCPKeepAliveRetry]
NAT Translation Table
NAT Translation Table
[NATTranslation]
Media Realm Table
Media Realm Table
[CpMediaRealm]
Remote Media Subnet Table
Version 7.0
Defines the interval (in sec) between the last data packet sent and the
first keep-alive probe to send.
The valid value is 10 to 65,000. The default is 60.
Notes:

Simple ACKs such as keepalives are not considered data packets.

TCP keepalive is enabled per SIP Interface in the SIP Interface table.
Defines the interval (in sec) between consecutive keep-alive probes,
regardless of what the connection has exchanged in the meantime.
The valid value is 10 to 65,000. The default is 10.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interface
table.
Defines the number of unacknowledged keep-alive probes to send
before considering the connection down.
The valid value is 1 to 100. The default is 5.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interface
table.
Defines NAT rules for translating source IP addresses per VoIP interface
(SIP control and RTP media traffic) into NAT IP addresses.
The format of the ini file table parameter is as follows:
[ NATTranslation ]
FORMAT NATTranslation_Index =
NATTranslation_SrcIPInterfaceName,
NATTranslation_TargetIPAddress, NATTranslation_SourceStartPort,
NATTranslation_SourceEndPort, NATTranslation_TargetStartPort,
NATTranslation_TargetEndPort;
[ \NATTranslation ]
For a detailed description of the table, see ''Configuring NAT Translation
per IP Interface'' on page 167.
Defines Media Realms.
The format of the ini file table parameter is as follows:
[ CpMediaRealm ]
FORMAT CpMediaRealm_Index = CpMediaRealm_MediaRealmName,
CpMediaRealm_IPv4IF, CpMediaRealm_IPv6IF,
CpMediaRealm_PortRangeStart, CpMediaRealm_MediaSessionLeg,
CpMediaRealm_PortRangeEnd, CpMediaRealm_IsDefault,
CpMediaRealm_QoeProfile, CpMediaRealm_BWProfile;
[ \CpMediaRealm ]
For a detailed description of the table, see ''Configuring Media Realms''
on page 319.
891
58. Configuration Parameters Reference
Description
Mediant 3000