AudioCodes Mediant 3000 User Manual page 1026

Parameter
Number
[Prefix2RedirectNumber]
Add Number Plan and Type
to RPI Header
[AddTON2RPI]
Source Manipulation Mode
[SourceManipulationMode]
Calling Name Manipulations IP-to-Tel Table
[CallingNameMapIp2Tel]
Calling Name Manipulations Tel-to-IP Table
[CallingNameMapTel2Ip]
User's Manual
from the Tel side. This prefix is added to the Redirect Number in the
SIP Diversion header.
The valid range is an 8-character string. By default, no value is defined.
Determines whether the TON/PLAN parameters are included in the
Remote-Party-ID (RPID) header.

[0] No

[1] Yes (default)
If the Remote-Party-ID header is enabled (EnableRPIHeader = 1) and
AddTON2RPI = 1, it's possible to configure the calling and called
number type and number plan using the Number Manipulation tables
for Tel-to-IP calls.
Determines the SIP headers containing the source number after
manipulation:

[0] = (Default) The SIP From and P-Asserted-Identity headers
contain the source number after manipulation.

[1] = Only SIP From header contains the source number after
manipulation, while the P-Asserted-Identity header contains the
source number before manipulation.
Configures rules for manipulating the calling name (caller ID) in the
received SIP message for IP-to-Tel calls. This can include modifying or
removing the calling name. The format of this table ini file parameter is
as follows:
[ CallingNameMapIp2Tel ]
FORMAT CallingNameMapIp2Tel_Index =
CallingNameMapIp2Tel_ManipulationName,
CallingNameMapIp2Tel_DestinationPrefix,
CallingNameMapIp2Tel_SourcePrefix,
CallingNameMapIp2Tel_CallingNamePrefix,
CallingNameMapIp2Tel_SourceAddress,
CallingNameMapIp2Tel_RemoveFromLeft,
CallingNameMapIp2Tel_RemoveFromRight,
CallingNameMapIp2Tel_LeaveFromRight,
CallingNameMapIp2Tel_Prefix2Add,
CallingNameMapIp2Tel_Suffix2Add;
[ \CallingNameMapIp2Tel ]
For a detailed description of the table, see ''Configuring SIP Calling
Name Manipulation'' on page 476.
Defines rules for manipulating the calling name (caller ID) for Tel-to-IP
calls. This can include modifying or removing the calling name.
[ CallingNameMapTel2Ip ]
FORMAT CallingNameMapTel2Ip_Index =
CallingNameMapTel2Ip_ManipulationName,
CallingNameMapTel2Ip_DestinationPrefix,
CallingNameMapTel2Ip_SourcePrefix,
CallingNameMapTel2Ip_CallingNamePrefix,
CallingNameMapTel2Ip_SrcTrunkGroupID,
CallingNameMapTel2Ip_RemoveFromLeft,
CallingNameMapTel2Ip_RemoveFromRight,
1026
Description
Document #: LTRT-89730
Mediant 3000