AudioCodes Mediant 3000 User Manual page 478

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

Parameter
Calling Name Prefix
[_CallingNamePrefix]
Source Trunk Group ID
[_SrcTrunkGroupID]
Source IP Address
[_SourceAddress]
Source Host Prefix
[_SrcHost]
Destination Host Prefix
[_DestHost]
Operation (Action)
Stripped Characters From
Left
[_RemoveFromLeft]
Stripped Characters From
Right
User's Manual
The default value is the asterisk (*) symbol (i.e., any source prefix).
Defines the caller name (i.e., caller ID) prefix.
You can use special notations for denoting the prefix. For example, to
denote calls without a calling name, use the $ sign. For a description of
available notations, see ''Dialing Plan Notation for Routing and
Manipulation Tables'' on page 827.
The default value is the asterisk (*) symbol (i.e., any calling name
prefix).
Defines the source Trunk Group ID from where the Tel-to-IP call was
received.
The default value is -1, which denotes any Trunk Group.
Note: The parameter is applicable only to the Calling Name
Manipulation Table for Tel-to-IP Calls table.
Defines the source IP address of the caller, for IP-to-Tel calls. The
source IP address appears in the SIP Contact header in the INVITE
message.
The default value is the asterisk (*) symbol (i.e., any IP address). The
source IP address can include the following wildcards:
"x" wildcard: represents single digits. For example, 10.8.8.xx
represents all IP addresses between 10.8.8.10 to 10.8.8.99.
"*" (asterisk) wildcard: represents any number between 0 and 255.
For example, 10.8.8.* represents all IP addresses between 10.8.8.0
and 10.8.8.255.
Note: The parameter is applicable only to the Calling Name
Manipulation Table for IP-to-Tel Calls table.
Defines the URI host name prefix of the incoming SIP INVITE message
in the From header.
The default value is the asterisk (*) symbol (i.e., any source host prefix).
Notes:
The parameter is applicable only to the Calling Name Manipulation
Table for IP-to-Tel Calls table.
If the P-Asserted-Identity header is present in the incoming INVITE
message, the value of the parameter is compared to the P-Asserted-
Identity URI host name (instead of the From header).
Defines the Request-URI host name prefix of the incoming SIP INVITE
message.
The default value is the asterisk (*) symbol (i.e., any destination host
prefix).
Note: The parameter is applicable only to the Calling Name
Manipulation Table for IP-to-Tel Calls table.
Defines the number of characters to remove from the left of the calling
name. For example, if you enter 3 and the calling name is
"company:john", the new calling name is "pany:john".
Defines the number of characters to remove from the right of the calling
name. For example, if you enter 3 and the calling name is
478
Description
Document #: LTRT-89730
Mediant 3000

Advertisement

Table of Contents
loading

Table of Contents