Configuring Syslog Debug Level - AudioCodes Mediant 3000 User Manual

User's Manual

Login and logout.

Actions that are not related to parameter changes (for example, file uploads, file
delete, lock-unlock maintenance actions, LDAP clear cache, register-unregister, and
start-stop trunk. In the Web, these actions are typically done by clicking a button (e.g.,
the LOCK button).
For more information on each of the above listed options, see ''Syslog, CDR and Debug
Parameters'' on page 858.
You can also configure the device to send an SNMP trap each time a user performs an
activity. To enable trap notification, use the parameter, EnableActivityTrap (see
''Configuring SNMP Community Strings'' on page 108).
Notes:
•
You can also view logged user activities in the Web interface (see ''Viewing Web
User Activity Logs'' on page 804).
•
Logging of CLI commands can only be configured through CLI or ini file.
The following procedure describes how to configure Web user activity logging through the
Web interface. You can also configure it through ini file (ActivityListToLog).

To configure Web user activities to report to Syslog server:
1. Open the Syslog Settings page (Configuration tab > System menu > Syslog
Settings).
2. Under the Activity Types to Report via Activity Log Messages group, select the Web
actions to report to the Syslog server.
3. Click Submit.

53.2.3 Configuring Syslog Debug Level

You can configure the amount of information (debug level) to include in Syslog messages.
In addition, you can enable the device to send multiple Syslog messages bundled into a
single packet as well as enable a protection mechanism that automatically lowers the
debug level when the device's CPU resources become low, ensuring sufficient CPU
resources are available for processing voice traffic.
Version 7.0
Figure 53-2: Web Activities to Report to Syslog
53. Syslog and Debug Recording
801 Mediant 3000