AudioCodes Mediant 3000 User Manual page 934

Parameter
RTCP XR Collection Server
[RTCPXREscIP]
Gateway RTCP XR Report
Mode
[RTCPXRReportMode]
SBC RTCP XR Report Mode
[SBCRtcpXrReportMode]
publication-ip-group-id
[PublicationIPGroupID]
User's Manual

[-1] Not Configured (default)

[0] UDP

[1] TCP

[2] TLS
Notes:

When set to [-1], the value of the SIPTransportType parameter
is used.

The parameter is applicable only to the Gateway application.
Defines the IP address of the Event State Compositor (ESC). The
device sends RTCP XR reports to this server, using SIP PUBLISH
messages, according to Internet-Draft draft-ietf-sipping-rtcp-
summary-13. The address can be configured as a numerical IP
address or as a domain name.
Note:

Instead of sending RTCP XR to an ESC server, you can send
RTCP XR to an IP Group (see the PublicationIPGroupID
parameter).

This parameter is applicable only to the Gateway application.
Determines whether RTCP XR reports are sent to the Event State
Compositor (ESC) and defines the interval at which they are sent.

[0] Disable = (Default) RTCP XR reports are not sent.

[1] End Call = RTCP XR reports are sent at the end of each call.

[2] End Call & Periodic = RTCP XR reports are sent at the end
of each call and periodically according to the RTCPInterval
parameter.
Note: The parameter is applicable only to the Gateway application.
Enables the sending of RTCP XR reports of QoE metrics at the end
of each call session (i.e., after a SIP BYE). The RTCP XR is sent in
the SIP PUBLISH message.

[0] Disable (default)

[1] End of Call
Note: The parameter is applicable only to the SBC application.
Defines the IP Group to where the RTCP XR is sent. If the value is -
1 (default) or 0, the RTCP XR is sent to the ESC server, as
configured by the RTCPXREscIP parameter.
Note: The parameter is applicable only to the Gateway application.
934
Description
Document #: LTRT-89730
Mediant 3000