Ssh Parameters - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
[TLSRemoteSubjectNam
e]
TLS Expiry Check Start
[TLSExpiryCheckStart]
TLS Expiry Check Period
[TLSExpiryCheckPeriod]
TLS FIPS 140 Mode
[TLS_Fips140_Mode]

58.4.5 SSH Parameters

Secure Shell (SSH) parameters are described in the table below.
Parameter
Enable SSH Server
[SSHServerEnable]
Server Port
[SSHServerPort]
SSH Admin Key
[SSHAdminKey]
Require Public Key
[SSHRequirePublicKey]
Max Payload Size
[SSHMaxPayloadSize]
Version 7.0
defined Proxies Host names/IP addresses and is not marked as 'critical',
the Common Name (CN) of the Subject field is compared with this value.
If not equal, the TLS connection is not established. If the CN uses a
domain name, the certificate can also use wildcards ('*') to replace parts
of the domain name.
The valid range is a string of up to 49 characters.
Note: The parameter is applicable only if the parameter
PeerHostNameVerificationMode is set to 1 or 2.
Defines the number of days before the installed TLS server certificate is
to expire at which the device must send a trap
(acCertificateExpiryNotification) to notify of this.
The valid value is 0 to 3650. The default is 60.
Defines the periodical interval (in days) for checking the TLS server
certificate expiry date.
The valid value is 1 to 3650. The default is 7.
Enables FIPS 140-2 conformance mode for TLS.

[0] Disable (default)

[1] Enable
Table 58-28: SSH Parameters
Enables the device's embedded SSH server.

[0] Disable (default)

[1] Enable
Defines the port number for the embedded SSH server.
Range is any valid port number. The default port is 22.
Defines the RSA public key for strong authentication for logging in to the
SSH interface (if enabled).
The value should be a base64-encoded string. The value can be a
maximum length of 511 characters.
Enables RSA public keys for SSH.

[0] = (Default) RSA public keys are optional if a value is configured for
the parameter SSHAdminKey.

[1] = RSA public keys are mandatory.
Note: To define the key size, use the TLSPkeySize parameter.
Defines the maximum uncompressed payload size (in bytes) for SSH
packets.
The valid value is 550 to 32768. The default is 32768.
873
58. Configuration Parameters Reference
Description
Description
Mediant 3000