Tdm Bus And Clock Timing Parameters - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
Line Build Out XPM2
[LineBuildOut.XPM2]
[TDMHairPinning]
[TDMHairPinningAlarmIndicatio
n]
Enable TDM Tunneling
tdm-tunneling
[EnableTDMoverIP]
[ISO8859CharacterSet]
58.10.6.2

TDM Bus and Clock Timing Parameters

The TDM Bus and clock timing parameters are described in the table below.
Version 7.0
Defines the Framer's XPM2 register value (line pulse shape
control).
The range is 0 to 255. The default is 0.
Note: The parameter is applicable only when the parameter
TrunkConfig.LineBuildOut.Overwrite is set to 1.
Defines static TDM hair-pinning (cross-connection) performed at
initialization. The connection is between trunks with an option to
exclude a single B-channel in each trunk. Format example: T0-
T1/B3,T2-T3,T4-T5/B2.
Note: For the parameter to take effect, a device reset is required.
Enables two trunks that are connected through TDM hairpinning to
signal the Far-End about the presence of PSTN alarms. When the
trunk with TDM hairpinning receives a PSTN alarm, its' connected
trunk sends an AIS alarm to its' Far-End.

[0] = (Default) Disable

[1] = Enable
Note:

For the parameter to take effect, a device reset is required.

The parameter is applicable only to PRI.
Enables TDM tunneling.

[0] Disable (default)

[1] Enable
Notes:

For the parameter to take effect, a device reset is required.

For an overview on TDM tunneling, see TDM Tunneling on page
443.
Defines the ISO 8859 character set type (languages) for
representing the alphanumeric string of the calling name (caller ID)
in the forwarded message, for IP-to-Tel and Tel-to-IP calls.

[0] No Accented = Proprietary method where incoming INVITE
messages with any accented characters (e.g., á, é, í, ó, and ü),
which are represented in a 2-byte unicode character, are
translated to Latin-only, which are normal one-byte ASCII
characters (a, e, i, o, and u, respectively).

[1] Western European (Default)

[2] Central European

[3] South European

[4] North European

[5] Cyrillic

[6] Arabic

[7] Hebrew

[8] Turkish
967
58. Configuration Parameters Reference
Description
Mediant 3000