AudioCodes Mediant 3000 User Manual page 781

User's Manual
Notes:
•
You can customize the default CDR fields if desired. For customizing Gateway-
related CDRs, see Customizing CDRs for Gateway Calls on page 772. For
customizing SBC-related CDRs, see Customizing CDRs for SBC Calls on page
775.
•
To configure the address of the RADIUS Accounting server, see ''Configuring
RADIUS Servers'' on page 238.

To configure RADIUS accounting:
1. Open the RADIUS Parameters page (Configuration tab > VoIP menu > SIP
Definitions > RADIUS Parameters Settings).
2. Set the 'Enable RADIUS Access Control' parameter to Enable.
3. Configure the remaining parameters as required. For a description of these
parameters, see ''RADIUS Parameters'' on page 1054.
4. Click Submit.
5. For your settings to take effect, reset the device with a flash burn.
The table below lists the RADIUS Accounting CDR attributes included in the
communication packets transmitted between the device and a RADIUS server.
Table 52-5: Supported RADIUS Accounting CDR Attributes
Attribute Attribute
ID Name
Request Attributes
1 user-name
4 nas-ip-
address
6 service-type
26 h323-
incoming-
conf-id
26 h323-remote-
address
26 h323-conf-id
Version 7.0
Figure 52-11: RADIUS Accounting Parameters Page
Vendor-
Specific
Attribute
(VSA) ID
(Standard) Account number or
calling party number
or blank
(Standard) IP address of the
requesting device
(Standard) Type of service
requested
1 SIP call identifier
23 IP address of the
remote gateway
24 H.323/SIP call
52. Reporting Information to External Party
Value
Description
Format
String up
to 15
digits
long
Numeric
Numeric
Up to 32
octets
Numeric
Up to 32
781
Example AAA
5421385747 Start Acc
Stop Acc
192.168.14. Start Acc
43 Stop Acc
1: login Start Acc
Stop Acc
h323- Start Acc
incoming- Stop Acc
conf-
id=3839353
0
- Stop Acc
Start Acc
Mediant 3000