To install Wireshark and the plug-ins for debug recording:
1.
Install Wireshark on your computer. The Wireshark program can be downloaded from
http://www.wireshark.org.
2.
Download the proprietary plug-in files from www.audiocodes.com/downloads.
3.
Copy the plug-in files to the directory in which you installed Wireshark, as follows:
Copy this file
...\dtds\cdr.dtd
...\plugins\<Wireshark ver.>\*.dll
...\tpncp\tpncp.dat
4.
Start Wireshark.
5.
In the Filter field, type "acdr" (see the figure below) to view the debug recording
messages. Note that the source IP address of the messages is always the OAMP IP
address of the device.
The device adds the header "AUDIOCODES DEBUG RECORDING" to each debug
recording message, as shown below:
User's Manual
To this folder on your PC
Wireshark\dtds\
Wireshark\plugins\<Wireshark ver.>
Wireshark\tpncp
806
Mediant 3000
Document #: LTRT-89730