AudioCodes Mediant 3000 User Manual page 383

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

User's Manual
Parameter
Silence Suppression
[CodersGroup0_Sce]
Coder Specific
[CodersGroup0_CoderSpecific]
The table below lists the supported coders:
Coder Name
G.711 A-law
[g711Alaw64k]
G.711 U-law
[g711Ulaw64k]
G.711A-law_VBD
[g711AlawVbd]
G.711U-law_VBD
[g711UlawVbd]
G.722
[g722]
Version 7.0
Enables silence suppression for the coder.
[0] Disable (Default)
[1] Enable
[2] Enable w/o Adaptation =Applicable only to G.729.
Notes:
If silence suppression is not configured for a coder, the
settings of the EnableSilenceCompression parameter is used.
If G.729 is configured with silence suppression disabled, the
device includes 'annexb=no' in the SDP of the relevant SIP
messages. If silence suppression is enabled or set to Enable
w/o Adaptations, 'annexb=yes' is included. An exception to
this logic is when the remote gateway is Cisco equipment
(IsCiscoSCEMode).
Silence suppression is currently not supported for the MS RTA
coder. The bit rate defines the originator bit rate in accordance
to the sample time. The MS RTA coder can be used in
transcoding sessions with the G.722 wideband codec. In
addition, wideband Linear PCM files can be played on an MS
RTA channel, preserving the file's wideband quality.
Defines additional settings specific to the coder.
Currently, the parameter is applicable only to the AMR coder and
is used to configure the payload format type.
[0] 0 = Bandwidth Efficient
[1] 1 = Octet Aligned (default)
Note: The AMR payload type can be configured globally using
the AmrOctetAlignedEnable parameter. However, the Coder
Group configuration overrides the global parameter.
Table 20-2: Supported Coders
Packetization Time
(msec)
10, 20 (default), 30, 40,
50, 60, 80, 100, 120
10, 20 (default), 30, 40,
50, 60, 80, 100, 120
10, 20 (default), 30, 40,
50, 60, 80, 100, 120
10, 20 (default), 30, 40,
50, 60, 80, 100, 120
20 (default), 40, 60, 80,
100, 120
Description
Rate (kbps)
64
64
64
64
64 (default)
383
20. Coders and Profiles
Payload
Silence
Type
Suppression
[0] Disable
8
[1] Enable
[0] Disable
0
[1] Enable
8 or
N/A
Dynamic
(default 118)
Dynamic
N/A
(default 110)
9
N/A
Mediant 3000

Advertisement

Table of Contents
loading

Table of Contents