AudioCodes Mediant 3000 User Manual page 192

Parameter Name
Remote Tunnel Addr
[IPsecSATable_RemoteTu
nnelAddress]
Remote Subnet Addr
[IPsecSATable_RemoteS
ubnetIPAddress]
Remote Prefix Length
[IPsecSATable_RemoteS
ubnetPrefixLength]
Interface Name
[IPsecSATable_InterfaceN
ame]
User's Manual
Defines the IP address of the peer router.
Note: The parameter is applicable only if the Operational Mode is set to
Tunnel.
Defines the IP address of the remote subnet. Together with the Prefix
Length parameter (below), the parameter defines the network with
which the IPSec tunnel allows communication.
Note: The parameter is applicable only if the Operational Mode is set to
Tunnel.
Defines the prefix length of the Remote Subnet IP Address parameter
(in bits). The prefix length defines the subnet class of the remote
network. A prefix length of 16 corresponds to a Class B subnet
(255.255.0.0); a prefix length of 24 corresponds to a Class C subnet
(255.255.255.0).
Note: The parameter is applicable only if the Operational Mode is set to
Tunnel.
Assigns a network interface to this IPSec rule. The network interfaces
are defined in the Interface table ('Interface Name' column) in
''Configuring IP Network Interfaces'' on page 145
192
Description
Document #: LTRT-89730
Mediant 3000