Configuring Snmp Trusted Managers - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
Trap User
[SNMPManagerTrapUser]
Trap Enable
[SNMPManagerTrapSendi
ngEnable_x]
9.4

Configuring SNMP Trusted Managers

The SNMP Trusted Managers table lets you configure up to five SNMP Trusted Managers
based on IP addresses. By default, the SNMP agent accepts SNMP Get and Set requests
from any IP address as long as the correct community string is used in the request.
Security can be enhanced by using Trusted Managers, which is an IP address from which
the SNMP agent accepts and processes SNMP requests.
The following procedure describes how to configure SNMP trusted managers through the
Web interface. You can also configure it through ini file (SNMPTrustedMgr_x).

To configure SNMP Trusted Managers:
1. Open the SNMP Trusted Managers table (Configuration tab > System menu >
Management > SNMP > SNMP Trusted Managers).
2. Select the check box corresponding to the SNMP Trusted Manager that you want to
enable and for whom you want to define an IP address.
3. Define an IP address in dotted-decimal notation.
4. Click Submit, and then save ("burn") your settings to flash memory.
Version 7.0
Associates a trap user with the trap destination. This determines the
trap format, authentication level, and encryption level.

v2cParams (default) = SNMPv2 user community string

SNMPv3 user configured in ''Configuring SNMP V3 Users'' on page
112
Activates the sending of traps to the SNMP Manager.

[0] Disable

[1] Enable (Default)
Figure 9-3: SNMP Trusted Managers Table
111
9. SNMP-Based Management
Description
Mediant 3000