AudioCodes Mediant 3000 User Manual page 694

external server.

Authenticating as a server incoming user requests (for SBC security).
If the device registers on behalf of users and the users do not perform registration, any SIP
request destined to the user is routed to the Proxy Set associated with the user's IP Group.
You can configure up to 3,000 users (table rows) in the SBC User Info table. The SBC
User Info table can be configured using any of the following methods:

Web interface - see ''Configuring SBC User Info Table through Web Interface'' on
page 694

Loadable User Info file - see ''Configuring SBC User Info Table in Loadable Text File''
on page 696
44.1.7.3.1 Configuring SBC User Info Table through Web Interface
The following procedure describes how to configure the SBC User Info table through the
Web interface.
Note:
removed from the table in the Web interface and replaced with the entries from the
loaded User Info file.

To configure the SBC User Info table through the Web interface:
1. Open the SBC User Info table (Configuration tab > VoIP menu > SIP Definitions >
User Information > SBC User Info Table).
2. Click Add; the following dialog box appears:
Figure 44-4: SBC User Info Table - Add Row Dialog Box
3. Configure the SBC User Info table parameters according to the table below.
4. Click Add.
5. To save the changes to flash memory, see ''Saving Configuration'' on page 672.
To register a user, select the user's table entry, and then from the Action button's drop-
down list, choose Register. To un-register a user, select the user, and then from the
Action button's drop-down list, choose Un-Register.
Table 44-3: SBC User Info Table Parameter Descriptions
Parameter
Index
User's Manual
If you load any User Info file to the device, all previously configured entries are
Defines an index number for the new table row.
Description
694
Mediant 3000
Document #: LTRT-89730