AudioCodes Mediant 3000 User Manual page 1022

Parameter
Redirect Number SIP to
TEL
[SetIp2TelRedirectScreenin
gInd]
Set IP-to-TEL Redirect
Reason
[SetIp2TelRedirectReason]
Set TEL-to-IP Redirect
Reason
[SetTel2IpRedirectReason]
Send Screening Indicator to
IP
[ScreeningInd2IP]
User's Manual
Defines the value of the Redirect Number screening indicator in ISDN
Setup messages.

[-1] Not Configured (default)

[0] User Provided

[1] User Passed

[2] User Failed

[3] Network Provided
Defines the redirect reason for IP-to-Tel calls. If redirect (diversion)
information is received from the IP, the redirect reason is set to the
value of the parameter before the device sends it on to the Tel.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Defines the redirect reason for Tel-to-IP calls. If redirect (diversion)
information is received from the Tel, the redirect reason is set to the
value of the parameter before the device sends it on to the IP.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Overrides the calling party's number (CPN) screening indication in the
received ISDN SETUP message for Tel-to-IP calls.

[-1] Not Configured = (Default) Not configured (interworking from
ISDN to IP) or set to 0 for CAS.

[0] User Provided = CPN set by user, but not screened (verified).

[1] User Passed = CPN set by user, verified and passed.

[2] User Failed = CPN set by user, and verification failed.

[3] Network Provided = CPN set by network.
Note: The parameter is applicable only if the Remote Party ID (RPID)
1022
Description
Document #: LTRT-89730
Mediant 3000