Parameter
Minute Cost
[CostGroupTimebands_
MinuteCost]
16.4.2.3 Assigning Cost Groups to Routing Rules
To use your configured Cost Groups, you need to assign them to routing rules:
Gateway application: Tel-to-IP Routing table - see Configuring Tel-to-IP Routing Rules
on page 496
SBC application: IP-to-IP Routing table - see Configuring SBC IP-to-IP Routing Rules
on page 603
User's Manual
Defines the call cost per minute charge during this timeband.
The valid value range is 0-65533. The default is 0.
Note: The entered value must be a whole number (i.e., not a decimal).
278
Description
Document #: LTRT-89730
Mediant 3000