Moving The Fixture To Setup Position; Self-Tests - High End Systems studio spot User Manual

Moving the Fixture to Setup Position

Caution: The setup position is used only by service personnel before
maintenance routines.
To place the fixture in setup position before servicing, complete the following
procedure:
1. Hold <
2. Using the up and down buttons, scroll to the T E S T field and press
<
ENTER
3. Using the up and down buttons, scroll to the S / U P field and press
<
ENTER
are electronically locked into place.
4. Perform the appropriate maintenance procedures.
5. Press <

Self-Tests

Studio Spot has a comprehensive set of self-tests to check each mechanical
system. Refer to "S E L F " on page 3-4 for a complete list of self-tests and
descriptions.
To begin the self-test function, complete the following procedure:
1. Hold <
2. Using the up and down buttons, scroll to the T E S T field and press
<
ENTER
3. Using the up and down buttons, scroll to the S E L F field and press
<
ENTER
4. Using the up and down buttons, scroll to the desired test and press
<
ENTER
5. To exit the test in progress, press <
3-24 Studio Spot User's Manual
> until the display changes to A d d R .
MENU
>.
>. The display will indicate S E T N O W while the motors
> to reset and home the fixture.
MENU
> until the display changes to A d d R .
MENU
>.
>.
>. The fixture will perform the desired test(s).
>.
MENU