Unpacking The Fixture - High End Systems intellaspot XT-1 User Manual

Chapter 2:
Setup and Configuration
Installation of your intellaspot XT-1 fixture includes mounting, connecting
to power and DMX linking and configuration.
Use the following steps to set up and configure your fixture:
1. Unpack the fixture.
2. Install power cord cap for your location.
3. Mount the fixture upright or suspended from a standard truss.
4. Connect the fixture to a DMX controller via DMX cabling.
5. Configure the fixture for DMX control using the battery mode or after connecting
to power.

Unpacking the Fixture

The intellaspot XT-1 fixture ships in a box or an optional road case specifically designed to
protect the product during transport. When unpacking, inspect the fixture for physical damage
to components. High End Systems
during transport. Return a product for repair in its road case.
Before sending anything to the factory, call your High End Systems dealer/distributor
for a Return Material Authorization (RMA) number. The factory cannot accept any
goods shipped without an RMA number.
Pan and Tilt Locking
The intellaspot XT-1 fixture ships with pan and tilt latches locked. You can unlock/adjust these
latches to stabilize the fixture for mounting.
Note: Disengage Pan and Tilt locks before operating the fixture.
intellaspot XT-1 User Manual
TM
assumes no responsibility for products that are damaged
®
Tilt Lock
Pan Lock
7