Appendix B
Accessory Installation
In this appendix you will install:
lenses (B-2)
dichroic glass (B-4)
LithoPatterns, effects, and gobos (B-7)
Overview
This appendix provides information on how to correctly install approved
accessories. A list of accessories is provided in the "Introduction" on page
I-10. For ordering or additional information, contact your authorized dealer
or High End Systems. Refer to "Contacting High End Systems, Inc." on
page vi.
Specifications for dichroic glass, LithoPatterns, gobos, and effects are
provided in "Optical System" on page I-8.
Before You Begin
It is extremely important that you understand and adhere to the following
safety information.
Caution: do not install accessories that are not specified by High End Systems.
Doing so may damage the fixture, void the warranty, or render it
unsafe. Failure to install dichroic glass and LithoPatterns in the proper
orientation can damage them.
Warning: disconnect the fixture from power before servicing. Exterior surfaces
can reach 200° C and interior surfaces can exceed 250° C. Wait at
least five minutes before touching any surface.
Appendix B Accessory Installation
B-1