Resetting (Re-Initializing) A Scene - High End Systems studio spot User Manual

8. Press < > to back out of the C A P T menu.
MENU
9. Using the up and down arrow keys, scroll to E d I T and press
< >.
ENTER
10. Edit the T I M E , X F A d , and d L A Y parameters using the menu
system. Refer steps 8 through 10 located in "Editing with the Menu
System" on page 4-2 for assistance.
11. Repeat the steps 3 through 9 of this procedure for additional fixtures
and scenes.

Resetting (Re-Initializing) a Scene

Scenes are quickly reset to their blank (nullified) factory settings with the
menu system.
To reset a scene, complete the following procedure:
1. Press and hold <
necessary).
2. Using the up and down arrow buttons, scroll to the P R S T field and
press < >.
ENTER
3. Using the up and down arrow buttons, scroll to the E d I T field and
press < >. S N 0 1 (scene 1) will appear on the display.
ENTER
4. Using the up and down arrow buttons, scroll the scene to reset
(S N 0 1 - S N 1 6 ) and press <
5. Using the up and down arrow buttons, scroll to the Z E R O field and
press < >. O K ? will appear on the display.
ENTER
6. Press < > to reset the selected scene.
ENTER
> until the fixture unlocks the menu system (if
MENU
>.
ENTER
Chapter 4 Preset Scenes 4-7