Factory Color Wheels And Index Positions - High End Systems studio spot User Manual

color wheel 1 (lower)
2
yellow
3
CTO
4
aqua
5
pink
Figure B-5. Factory Color Wheels and Index Positions
Note: color wheel 1 is inversely oriented in the optical module.
6. Gently push the dichroic glass towards the spindle in the center of the
color wheel (A), lift the edge away from the wheel (B), and remove the
glass. Refer to Figure B-6.
.
A
Caution: do not bend or lift the inner tabs up, as you could damage them.
7. Install the new dichroic into the color wheel with the coated side towards
the wheel. Refer to Figure B-7. To determine the coated side, refer to
Figure B-8.
1
open
6
magenta
B.
Figure B-6. Removing the Dichroic Glass
color wheel 2 (upper)
2
cyan
1
3
open
l. cyan
6
4
magenta
indigo
5
pink
Appendix B Accessory Installation B-5