Appendix D Important Safety Information - High End Systems studio spot User Manual

Appendix D
Important Safety Information
Warning: For Continued Protection Against Fire
1. This equipment is designed for use with Phillips Type MSR 575/2 or MSD
575 lamp only. Use of any other type lamp may be hazardous and will void
the warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter (3.28 feet) from combustible materi-
als.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 1.0 meter (3.28 feet).
6. This equipment for connection to branch circuit having a maximum overload
protection of 20 A.
Warning: For Continued Protection Against Electric Shock
If this equipment was received without a line cord plug, attach the appropriate
line cord plug according to the following code:
• brown–live
• blue–neutral
• green/yellow–earth
As the colours of the cores in the mains lead of this equipment may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
• the core which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter E or by the earth
symbol , or coloured green or green and yellow.
• the core which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
• the core which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
1. This equipment must be earthed.
2. Disconnect power before re-lamping or servicing.
3. Equipment suitable for dry locations only. Do not expose this equipment to
rain or moisture.
4. Refer servicing to qualified personnel; no user serviceable parts inside.
5. Class I equipment - this fixture employs a grounded type receptacle and is not
intended for connection to a two wire, ungrounded source of supply.

Appendix D Important Safety Information

D-1