Playing Back Synchronized Scenes - High End Systems studio spot User Manual

Playing Back Synchronized Scenes

To playback synchronized scenes, complete the following procedure:
1. Press and hold <
necessary).
2. Using the up and down arrow buttons, scroll to the P R S T field and
press < >.
ENTER
3. Using the up and down arrow buttons, scroll to the P L A Y field and
press < >. O F F will appear on the display.
ENTER
4. Using the up and down arrow buttons, scroll to the O N field and
press < >. The display will indicate P R S T with a dot in the
ENTER
lower right-hand corner to indicate you are in playback mode and the
programmed scenes will begin playback. The slave fixtures will then
synchronize their clocks to the master fixture.
Note: if the master fixture is turned on after the slaves, it may take up to one
sequence for all fixtures to synchronize.
> until the fixture unlocks the menu system (if
MENU
Chapter 4 Preset Scenes 4-11