Front And Side Panel Functionality; Front Panel - High End Systems studio spot User Manual

Front and Side Panel Functionality

A
B
C
D
E
F
A- power supply indicator. This LED is on when the motor power supply
Motor
has voltage.
B- power supply indicator. This LED is on when the lamp is on, off if the
Lamp
lamp is turned off, or flashing if there is a malfunction.
C- supply indicator. This LED is on when the logic board is supplied with +5
5V
volts.
D- data indicator. This LED is on when the fixture is the bus master (not
Transmit
the controller), when the fixture is the master during a crossload, and during
preset playback.
E- data indicator. This LED flickers to reflect received data.
Receive
F- 15-segment four character alpha-numeric L.E.D. display. The display provides
data, status, and internal diagnostic features.
G- < > button. This button unlocks the menu system and backs out of the
MENU
current field.
H- < > button. This button enters the current field and stores data.
ENTER
I- Down button. This button scrolls downward through data fields and values.
J- Up button. This button scrolls upward through data fields and values.
G
Figure 3. Front Panel
H
J
I
Introduction I-13