Onboard Self-Tests
Studio Spot has on-board self-tests to diagnose problems. If you are
2
experiencing problems that you suspect are mechanical, perform the tests
outlined in "Self-Tests" on page 3-24.
Testing DMX Data
Studio Spot has the ability to view any of the 512 DMX channels on its link.
This is a very useful feature to ensure Studio Spot and other fixtures are
receiving the correct data from your DMX controller. To test individual DMX
data by channel, perform the procedures outlined in "Viewing DMX Data by
Channel Number" on page 3-21. To view DMX errors, overrun errors, framing
errors, and start code errors refer to the procedures outlined in "Viewing
DMX Errors and Construct Values" on page 3-21.
Appendix A Troubleshooting and Maintenance
A-9