Inspecting The Fixture; Registering Your Product; Removing The Bezel - High End Systems studio spot User Manual

Inspecting the Fixture

After unpacking the box, complete the following procedure to inspect the
fixture:
1. Place the fixture upright on a flat surface.
2. Inspect the fixture for physical damage.
3. Remove the bezel by releasing the two latches located in the middle of
the fixture head. Refer to Figure 1.1.
4. Remove the safety cable from its latch and set the bezel aside.
5. Inspect the inside of the optical assembly for any visible damage to
glass components.
6. Replace the bezel, secure the safety cable to its clamp, and relatch the
bezel.

Registering Your Product

It is extremely important that you register your Studio Spot with High End
Systems. To register your fixture, have your serial number(s) handy and
call toll free at 888-696-5711 or register on-line at http://info.highend.com/
service/service.html.
1-2 Studio Spot User's Manual
latch
Figure 1.1 Removing the Bezel
latch