Copying And Pasting Scenes; Capturing Dmx Data Into A Scene - High End Systems studio spot User Manual

Copying and Pasting Scenes

Scenes are easily copied and pasted between locations. This is beneficial
when you only want to modify a few constructs, such as pan and tilt.
To copy and paste a scene, complete the following procedure:
1. Press and hold <
necessary).
2. Using the up and down arrow buttons, scroll to the P R S T field and
press <
3. Using the up and down arrow buttons, scroll to the C O P Y field and
press <
4. Press <
5. Using the up and down arrow buttons, select the scene to copy
(F O 0 1 - F O 1 6 ) and press <
6. Press <
scene).
7. Using the up and down arrow buttons, select the destination (T O 0 1 -
T O 1 6 ) and press <
return to the C O P Y field.

Capturing DMX Data Into a Scene

Studio Spot can create preset scenes by capturing data from a DMX
controller. All constructs can be captured except for T I M E , X F A d , and
d L A Y .
To capture DMX data, complete the following procedure:
1. Check and ensure that the fixture(s) are properly addressed and
respond to your controller.
2. Press and hold <
necessary).
3. Using the up and down arrow buttons, scroll to the P R S T field and
press <
4. Using the up and down arrow buttons, scroll to the C A P T field and
press <
5. Using the up and down arrow buttons, select the destination scene. Do
not press <
6. Using your controller, program the desired look(s).
7. Press <
display will indicate d O N E .
4-6 Studio Spot User's Manual
> until the fixture unlocks the menu system (if
MENU
>.
ENTER
>. F R O M will appear on the display.
ENTER
> again to select the scene to copy (source scene).
ENTER
> again to select the scene to paste to (destination
ENTER
>. The display will indicate d O N E and
ENTER
> until the fixture unlocks the menu system (if
MENU
>.
ENTER
>. S N 0 1 will appear on the display.
ENTER
> yet.
ENTER
> to capture the DMX data to the selected scene. The
ENTER
>. T O will appear in the display.
ENTER