Viewing Lamp Hours
To view the number of hours the lamp has spent on (ignited), complete the
following procedure:
1. Hold <
MENU>
2. Using the up and down buttons, scroll to the I N F O field and press
<
>.
ENTER
3. Using the up and down buttons, scroll to the L / H R field and press
<
> to view the lamp hours.
ENTER
Note: if the display indicates O V E R , the counter has rolled over 9999
hours.
Viewing Lamp Strikes
To view the number of times the ignitor has attempted to strike the lamp,
complete the following procedure:
1. Hold <
> until the display changes to A d d R .
MENU
2. Using the up and down buttons, scroll to the I N F O field and press
<
>.
ENTER
3. Using the up and down buttons, scroll to the L / S T field and press
<
>. The fixture will display the number of times the lamp has
ENTER
attempted to strike.
Notes: lamp strikes are automatically reset when the lamp hours are reset.
See "Resetting Lamp Hours" on page 3-16. If the display indicates
O V E R , the counter has rolled over 9999 lamp strikes and must be
manually reset.
Viewing System Version Number
To view the system version number (software revision level), complete the
following procedure:
1. Hold <
> until the display changes to A d d R .
MENU
2. Using the up and down buttons, scroll to the I N F O field and press
<
>.
ENTER
3. Using the up and down buttons, scroll to the V E R field and press
<
>. The fixture will display the current system version.
ENTER
Note: the version number is also displayed after power on.
until the display changes to A d d R .
Chapter 3 Menu System 3-17