Before Beginning Installation; Road Case Construction Side View - High End Systems studio spot User Manual

Note: do not scale the figures to design your road cases. They are provided for
informational purposes only.

Before Beginning Installation

Before you begin the installation read the following safety precautions:
• Disconnect the fixture from power before removing the bezel or changing the
lamp.
• Allow the unit to cool for at least five minutes before removing cover or
accessing the lamp.
• Wear protective gloves and goggles when working inside the unit.
1-4 Studio Spot User's Manual
ENTER to view lamp status
Figure 1.3 Road Case Construction Side View
Studio SPOT