High End Systems studio spot User Manual page 19

Strobing
Internal preset scene
memory
Optical encoders
L.E.D. display
L.E.D. status
indicators
Mounting
Stepper motors
Fixture shutdown,
lamp control, and
homing
Integral AC power
switch/breaker
Power factor
correction
The dimming system provides instant blackout, vari-
able and random speed strobes, variable and random
ramp/snap effects, and the blinking function. Addition-
ally, Studio Spot can dim while strobing.
Up to 16 scenes can be programmed for playback
without a controller. Scenes can be programmed from
the front panel or 'captured' from DMX data. You can
playback data in stand-alone mode or synchronize play-
back with up to 32 fixtures.
Studio Spot utilizes optical encoders for the pan and
tilt systems. The encoders automatically correct posi-
tion(s) if the fixture is jolted from a programmed posi-
tion.
A full function 15-segment four character alpha-
numeric display allows the user to easily program all
functions of the fixture. A full set of diagnostic func-
tions are available through the menu system. Studio
Spot can also serve as a DMX tester to view channel
values and DMX errors. The display can be remotely
turned on, off, or dimmed via DMX.
Five L.E.D. indicators visually provide the status of
the lamp power supply, motor power supply, and
data.
Studio Spot can be truss mounted on 22-inch
centers in any orientation or it can be floor
mounted on its rubber feet.
All motors are digitally controlled steppers. They
provide precision control, high torque, smooth
movement, near quiet performance, and very long
life.
Fixture shutdown, lamp on/off, and homing can be
accessed remotely via DMX. You can also turn the
lamp on or off and home the fixture with the front
panel menu system.
The power switch/breaker is conveniently located on
the side of the fixture.
Studio Spot is fully power factor corrected to optimize
the light source's efficiency and deliver maximized
power economy.
Introduction I-5