Table of Contents
Advertisement
Cleaning
You should clean your Studio Spot on a regular basis. Dust, fog, and smoke
2
particles can accumulate and cause malfunctions.
To clean the exterior surfaces, wipe with a soft lent-free polyester cloth or
use a small vacuum to remove any built-up dust and dirt. For stubborn
substances (grime and serious build up), use Industrial Strength Green 409™
cleaner (sparingly) and a soft cloth.
Caution: Do not use a blower because it will force foreign particles into the
fixture.
To clean interior surfaces and optical components, use a soft lent-free
polyester cloth with isopropyl ((CH
)
CHOH) or ethyl (CH
CH
OH) alcohol.
3
2
3
2
Tip: for optimal cleaning, use a mixture of 70% alcohol to 30% water for the
initial cleaning. Then clean the same parts with 100% alcohol.
Appendix A Troubleshooting and Maintenance A-13
Advertisement
Table of Contents
Troubleshooting
